Electric fluorine lined regulating valve
Detailed technical analysis of electric fluorine lined regulating valve:
1、 Core Definition and Structure
Electric fluorine lined regulating valve is an industrial valve driven by an electric actuator and lined with fluoroplastic in the valve body, specifically designed for flow control of highly corrosive media. Its core structure includes:
Fluorine lined valve body: The valve body, valve core and other overcurrent components are lined with 2-5mm thick fluoroplastic (PTFE/F46/PFA), which can withstand strong corrosive media such as 98% concentrated sulfuric acid and hydrofluoric acid.
Electric actuator: Supports remote control with 4-20mA signal, response time ≤ 0.5 seconds, compatible with DN15-300 diameter.
Double sealing system: bellows+packing combination seal, with a leakage rate lower than the national level IV standard (≤ 10 ⁻⁶ Pa · m3/s).
2、 Performance parameter comparison
Parameter category: Standard type, High temperature type, Special customized type
Temperature resistance range -40~+200 ℃ -20~+250 ℃ (PFA lining) -200~+260 ℃
Pressure rating PN1.0-2.5MPa PN6.4MPa ANSI 600LB
Flow characteristics linear/equal percentage adjustment ratio 250:1 350:1
Leakage level ANSI Class VI Vacuum level Nuclear level
Valve model: ZDLPF46
Diameter specification: DN20-DN150mm
Structural form: Single seat plunger lined with fluorine valve core
Valve body material: cast steel (WCB), stainless steel (304, 316, 316L)
Nominal pressure: PN16
Applicable temperature: -40-180 ℃
Application scope: Strong corrosive media such as acids and alkalis, as well as toxic and volatile gases and liquids
Product features: Corrosion resistance, good sealing performance, small leakage
選型建議
